Mesa Pavers Free quote

Mesa, Arizona

Paver patios, driveways & pool decks in Mesa

Turn bare dirt, cracked concrete or a sun-baked slab into a finished outdoor space. Tell us what you're planning and a licensed hardscape contractor will measure it and give you a written quote.

  • Concrete pavers
  • Brick
  • Travertine
  • Natural stone

Mesa Pavers is a free referral service. Your request goes to one licensed local contractor; we don't install pavers ourselves.

Get a paver quote

Tell us about the project. A licensed hardscape contractor serving Mesa will contact you to measure and quote it.

Projects

What we can help you build

Patios

A level, shaded-ready space off the back door, sized for a table, a grill or a full outdoor living area.

Driveways

Pavers on a heavier base built for vehicle loads, often in a herringbone pattern for strength.

Pool decks

Travertine and light-colored pavers that stay cooler underfoot than a concrete deck.

Walkways

Front entries, side yards and garden paths that tie the yard together.

Materials

Choosing your pavers

Installed cost per square foot, including materials and labor. Size, pattern and site prep move the final number.

Concrete pavers $10–17 / sq ft

The most common choice: wide range of colors and shapes, strong enough for driveways.

Brick $8–19 / sq ft

Classic clay or concrete brick for a traditional look.

Travertine $15–27 / sq ft

Natural stone popular around pools for its look and cooler surface in direct sun.

Natural stone $16–35 / sq ft

Flagstone and other cut stone for a premium, one-of-a-kind finish.

Installed ranges from HomeGuide (concrete pavers, natural stone) and HomeAdvisor (brick, travertine), checked November 2026.

Cost

What a paver patio costs around Phoenix

Angi puts the average Phoenix-area paver patio at about $3,925, with most projects between $2,479 and $7,231. Size and material are the biggest factors.

Use the cost calculator

  • ~$3,925Average paver patio, Phoenix area
  • $10–17Per sq ft, installed concrete pavers
  • $3.8k–6.8kTypical 20 × 20 ft patio

Sources: Angi Phoenix paver patio costs; HomeGuide paver patio costs.

Built for Mesa

Heat, hard water and your pavers

Desert sun and hard water both show up on outdoor surfaces. A few choices up front keep pavers looking good longer.

  • Pick lighter colors for bare feet. Light pavers and travertine stay noticeably cooler than dark surfaces; HomeGuide notes travertine stays 20–30% cooler than concrete in direct sun.
  • Watch the sprinklers. Overspray from hard water leaves white mineral spots. Aim heads away from the pavers and consider sealing.
  • Joints help. Pavers are laid as individual units, so a damaged one can be lifted and replaced instead of patching a whole slab.
12–22
grains per gallon, Mesa tap water

The City of Mesa reports water hardness between 12 and 22 gpg depending on which source serves your area. City of Mesa

How it's built

What goes under a paver job

Most paver problems start below the surface. Ask your contractor to walk you through each layer.

  1. Excavate

    Remove soil and old material, then grade so water drains away from the house.

  2. Base

    Compacted crushed gravel, thicker for driveways than for patios.

  3. Bed & lay

    A screeded sand bed, then pavers set in the chosen pattern.

  4. Lock & finish

    Edge restraints, joint sand and compaction, then optional sealing.

Service area

All of Mesa

We take requests across Mesa, and from nearby Gilbert, Chandler, Tempe and Apache Junction when a contractor is available.

  • 85201
  • 85202
  • 85203
  • 85204
  • 85205
  • 85206
  • 85207
  • 85208
  • 85209
  • 85210
  • 85212
  • 85213
  • 85215

Before you sign

Check the contractor's license with the Arizona Registrar of Contractors, get the base depth and paver product in writing, and confirm whether your HOA needs to approve the design first.

FAQ

Paver questions

Pavers or poured concrete?

Poured concrete usually costs less up front. Pavers cost more, but come in far more styles, and a stained or damaged paver can be lifted and replaced without breaking out a slab.

Do pavers need sealing?

It's optional. Sealing helps pavers resist stains and hard-water spotting and can deepen the color. HomeAdvisor puts resealing at about $1.50–3 per square foot.

Can pavers go over my existing concrete?

Sometimes, if the slab is sound and drains well. A contractor will check for cracks and height issues at doors before recommending it.

Do I need a permit?

Many simple patios don't, but requirements depend on the project and location. Your contractor or the City of Mesa can confirm, and HOAs often require design approval.

Is there a cost to request a quote?

No. The request and the site visit are free, and you decide whether to hire the contractor.

Ready to price your project?

Free on-site measurement and a written quote from a licensed Mesa contractor.